Flame Retardant Coating (10kg)

Why Choose Intelligent Protect AC Flame Retardant Coating?

• Warrington Exova Certified – Intelligent Protect AC Flame Retardant coating is fire rated by leading fire certification company, Warrington Exova
• Multiple Surfaces – Intelligent Protect AC FR can be sprayed on glass or aluminium
• Easy Install – Application of Intelligent Protect AC FR is as point and spray with a standard Graco machine (available via our accessories page)
• 12 Month Internal Protection – Intelligent Protect AC FR can be left on the inside of the building for up to 12 months, then simply peeled away when done
• Free Training – That’s right. We offer free training on all of our products
• No More Repair Bills – Save on repair bills by eliminating the risk of damage to your new windows and doors during construction
• Cost saving – complete and effective protection against damages that can occur during construction works
• Time saving – simple and fast application with airless spray device or paint roller
• Solvent free
• Both for inside and outside use, short and long term
• Intelligent Protect FR coating does not detach due to wind and does not relieve toxic gasses upon burning

Can Be Used on Multiple Surfaces Including Glass or Aluminium

Prior To Application:

• Trial on a little visible area with a paintbrush; remove after 3 days and evaluate.
• Tape ventilation areas etc.
• Stir Intelligent Protect FR coating for homogenisation; do not add solvents or water.
• Product comes ready to use.

Application:

• Minimum requirements: Temperature: > 5°C and on a dry surface; do not apply during rain or when rain is expected within 24 hours after application
• Apply a sufficient thickness of Intelligent Protect FR coating as to guarantee easy peelability and complete protection; 0,6 – 0,7 kg/m2 or about 600 to 700 micron is sufficient for most applications.
• Check application thickness with wet film gauge. In case of increased risk to damages, apply a total of 1 kg/m2 or 1000 micron, in two layers, the second layer when the first layer is tack free
• In case of application with paint roller, use a long haired roller and always apply in two layers; second layer shortly after the first layer is tack free.
• Depending on temperature, humidity, ventilation and sprayed thickness, the film will be tack free within 0,5 to 8 hours after application
• Total drying time is between 4 and 48 hours during which the film may not come in contact with rain or any other form of water, nor with temperatures < 5°C
• In case of inside application, allow sufficient ventilation
• Remove Intelligent Protect FR protection film at the end of construction works